Reprolon Texas - PTFE, Teflon, Scrap, Resin http://reprolontexas.com We buy scrap Teflon, and turn it into reusable resin. Thu, 24 Nov 2011 02:10:03 +0000 en hourly 1 http://wordpress.org/?v=3.2.1 Scrap Acquisition http://reprolontexas.com/45/powders http://reprolontexas.com/45/powders#comments Wed, 27 Oct 2010 02:37:23 +0000 amattingly http://reprolontexas.com/?p=45

Reprolon Texas in one of the largest PTFE recyclers in the nation, and we are always looking for new sources of PTFE scrap.

Reprolon Texas Purchasing & Grading Criteria for PTFE Scrap

Scrap Teflon

Grade 1 Scrap

Includes clean items fabricated from virgin granular PTFE molding powders, unmodified by pigments or fillers. Typical examples are: cores; cracked billets and preforms; rod, tube, and sheet ends; chucking stub;, out-of-tolerance and obsolete parts; heavy tape punchings and trimmings; and exceptionally clean machine turnings uncontaminated by oil.

Grade 2 Scrap

Includes items similar to Grade 1 Scrap; however, the products may be fabricated from partially or totally reprocessed PTFE, with some easily removable contamination allowable.

Grade 3 Scrap

Includes etched, degraded virgin or reprocessed PTFE. Items with deeply embedded contaminants such as rusty valve seats and gaskets, wire and cable jackets, oil contaminated machine turnings and the like.

Unusable Scrap

As it is extremely difficult to remove excessive amounts of oil and contaminants from some machine turnings and other types of scrap. Proper care of these contaminated products should be exercised during their collection and storage. Any overly contaminated scrap, particularly oily pieces, will greatly reduce its vale, and may downgrade the entire container as unusable. Freight charges on unusable scrap will be deducted from the value of the usable scrap.

Recycle – Reuse – Reprolon Texas

[contact-form-7] ]]> http://reprolontexas.com/45/powders/feed 0 Powders http://reprolontexas.com/40/scrap-acquisition http://reprolontexas.com/40/scrap-acquisition#comments Wed, 27 Oct 2010 02:28:49 +0000 amattingly http://reprolontexas.com/?p=40

Our air milling and separation facilities can produce micronized PTFE down to a 3 micron particle size or custom grind per request, verified by laser refraction in the lower micron levels. We run only PTFE in our equipment, avoiding contamination with other polymers.

]]> http://reprolontexas.com/40/scrap-acquisition/feed 0 Compounds http://reprolontexas.com/1/hello-world http://reprolontexas.com/1/hello-world#comments Tue, 26 Oct 2010 18:36:06 +0000 amattingly http://reprolontexas.com/?p=1 Reprolon Texas offers PTFE filled compounds for molding.

Available fillers include:

  • Fiberglass
  • Graphite
  • Carbon
  • Bronze
  • Molybdenum

Our products are manufactured to meet ASTM D-4745-08 standards, and specific customer requirements. We offer a fairly priced product, as well as a timely delivery to meet your molding and machine needs.

]]> http://reprolontexas.com/1/hello-world/feed 0